Chain Blocks & Hoists | Winches | Sheave Blocks | Plate Clamps
		Plate Clamps CAMLOK plate clamps are manufactured in the U.K., with safety and reliability assured as they comply with international technical and quality assurance standards. An extensive range of CAMLOK plate clamps are kept in stock and clamps for specialised applications are also available. Universal Clamps - type CZ92 Designed to enable single plates to be turned over or lifted from the horizontal to the true vertical position efficiently and safely. Available with standard hook ring or with integral short chain sling. Suitable for all structural steel up to 300 Brinell surface hardness. Hinged Universal Clamps - type CX Designed to enable single plates or fabrications to be lifted at any angle for safe handling of awkward lifts previously considered hazardous. The eye can be fitted with a swivel for increased versatility which can also be insulated to allow welding to be carried out while suspended. Heavy Duty Horizontal Plate Clamp - type CH These clamps feature smooth jaws and are used in pairs, usually suspended from a lifting beam by a two-legged sling, for lifting single plates in a horizontal position. Maximum sling angle 90o. Pile Pitching Clamp - type CP These clamps are designed specifically for pitching sheet steel piling, with the advantage of a 15 metre rope for easy release of the clamp from the ground level. This present a faster and safer method than the laborious procedure of release when using a standard shackle. Not designed for extraction of driven piles. Oxygen Bottle Grab - type OBG Grab designed specifically for the safe lifting and handling of gas bottles. Large rubber lined jaws are fitted to protect the bottle surface. Plastic Clamp - type PC This clamp is manufactured from nylon with a polycarbonated moving jaw and rubber lined fixed pad. Designed for handling plastics, thin sheet plate, and composite materials. Screwlok Clamps - type SC92 Shackle Suspension Screwlok clamps are designed to fit the flanges of RSJ's and Universal beams as a semi-permanent lifting point suitable for use with powered hoists, chain blocks, Tirfors etc. The SC92 range has a shackle incorporated for load suspension. CAMLOK Horizontal Girder Clamp - type TTGC This new clamp is based on the Camlok TTG clamp, however it incorporates several additional features to make it easier to use: • A chain type lock in place of the usual locking lever which makes the clamp easier to open and close. • A handle on the back of the clamp to aid in positioning onto the girder.
		Wire Rope | Cable Stockings | Fibre Rope | Chain & Fittings Transport Equipment | Slings | Hardware | Specialised Products | Services