|
SINGLE EYE STOCKING
| Type A:
One end open, one end closed with a single eye. Designed to pull the cable by the end of the cable only Suitable
for electrical and hydraulic work, crane work, construction site handling work and pulling reinforcement strand.
In some applications Type A should be used with a swivel. When working with rough or corrugated conduit shoulder
protection may be required. |
 |
Manufacturing nylon cable stocking
|
Type NA:
As above made in nylon strand for protection of adjacent wire. See picture above.
Link to Data Tables:
DOUBLE EYE STOCKING
Type B:
Both ends open with a double eye one end. This "open" design allows the cable to pass through the stocking
hence the cable can be pulled either at the end or at any point along the cable.
Link to Data Tables:
LACE-UP DOUBLE EYE STOCKING
Type C:
Flat (lace-up) stocking with double eye. The stocking is "split" so that it can be wrapped around the
cable and then laced.
Link to Data Tables:
OPEN ENDED STOCKING
Type D:
Open both ends without eyes. Designed to join two ropes for installation purposes. Allows reasonably smooth join
to pass over sheaves.
Link to Data Tables:
STOCKING
Type R:
Open both ends with one eye. Made without any ferrules apart from in formation of eye. Suitable for small duct
work in electrical and hydraulic applications.
Link to Data Tables:
|